The Sound Station
 

The Sound Station
601 SE Frank Phillips Blvd.
Bartlesville, OK 74003 USA

Established    1978


Office      918-336-2240
                                    
Fax                  918-336-3908
Emergency      918-336-2241

Hours:  By Appointment
 
Please call to set a time, we don't want to miss you.

Trade-Ins
            The Montana SPC

Kevin's Comments,

The Montana SPC was the first center channel to show me what a true full range center could do. It is incredibly dynamic and is so evident to your whole A/V experience. It is magically sweet and allows the voice pattern data to be heard as a natural human voice and not shrill or to forward. I use it in my own theater and highly recommend it.  It uses the Scan Speak drivers and matches the SPX, EPS, XP, KAS and WAS models for timber matching.
The best Value, World Class speakers available.

The Montana SPC Center Speaker

PBN just can’t do anything halfway. It would have been a rather routine task to create a center channel from existing technology and design modules at PBN. It would have sounded quite acceptable. But that wasn’t good enough for Noerbaek.

He started from scratch, engineering every square inch of this remarkable speaker. The basic question was: What is a center channel supposed to do? It’s different for home theater than it is for music. In home theater the center channel’s primary duty is to reproduce the actor’s natural voice as it moves to various positions on the screen. With music, the audio track should create the impression that the listener is sitting front row center, yet it shouldn’t overpower the other speakers in the system.

It’s no easy feat to do both well in an audiophile speaker. PBN has done it. The internal engineering, baffle design and speaker aiming are some of the extraordinary accomplishments of the SPC-2. Best of all, this one speaker can perfectly round out a two-channel system by giving it an audio dimension previously unknown to most serious music aficionados.


Specifications:

  • Dimensions (HxWxD): 10.5" x 29" x 14"
  • Weight: 70 lbs
  • Frequency range: 40 - 30k Hz ± 1.5 dB
  • Finish: Custom order

Technical Features:

  • Superbly flat frequency response 40Hz to 30kHz +/- 1.5dB
  • Features two 7” long throw woofers with coated pulp cones
  • One 4” glass fiber mid-range driver. This is the same exclusive 
  • driver used in our higher-end EPS and XPS series speakers
  • One 1” high efficiency, low distortion fabric dome tweeter
  • Comes complete with 24db per octave acoustical Linkwitz-Riley  
    crossover slopes, plus six precision handwound inductors
  • Cabinet made of ultra-dense Ranger Board™, featuring specially
    engineered internal chambers and baffles
  • Choice of fine real-wood veneers and/or piano lacquer finish
  • Optional custom-made stand or wall mount bracket available

     For the utmost in sonic realism, a home theater system demands a high-quality center channel. The Montana SPC takes the SPX design into horizontal mode for ease of placement above or below a video monitor or screen. It can also be mounted directly behind a porous screen for incredible directionality. The use of a truly full range speaker like the SPC disproves the belief held by some home cinema experts that the center channel speaker does not need great bass capabilities. The dramatic impact of a film's soundtrack is especially pronounced when the SPC is flanked by a pair of SPX's in a multichannel configuration. Frequency response is 30Hz-22kHz; sensitivity is 91dB; weight is 115 lbs.


                                            




 Montana Mini Monitor   $1,875
 Montana Monitor   $2,500
 Montana SPC   $2,750
 Montana SPC2   $2,750
 Montana SSW   $4,000
 Montana SP3   $4,000
 Montana SPI   $6,000
 Montana SPX2   $6,500
 Montana EPS2  $10,000
 Montana EPX  $12,500
 Montana Liberty "new"  $14,750
 Montana XPS  $23,000
 Montana XPS-SIG  $28,750
 Montana KAS  $27,500
 Montana Sammy "new"
 $29,500
 Montana KAS2  $37,000
 Montana WAS  $55,000
 Montana Master Reference  $85,000